Go to navigation links
High quality decorative products

Sculptured Panels - Scarab

Sculptured Panel - Scarab Pattern: Black through-coloured MDF, coated with clear satin lacquer
  • Special order item in exact quantity required
  • Minimum thickness = 22mm
  • Pattern height = approx 12mm
  • This pattern does not repeat
  • Grooved or laminate balancer bonded to reverse
  • Scarab shown in black through-coloured MDF, coated with clear satin lacquer

Overview

Scarab is a repeating combination of shapes approx 250x50mm & 130x50mm maximum size that runs diagonally across the face of the panel. The maximum difference between the highest and lowest points is approx. 12mm. This pattern can be supplied as a single-layer or composite in minimum thickness of 22mm.

Although it is available in a range of materials and finishes, and can be produced in specific panel sizes & sets, Scarab is typically supplied using coloured MDF in a standard panel size of 2400x1200mm

In detail

Because removing a lot of material from one side of any panel can cause it to cup towards the machined face, the panels are often ordered with a diamond pattern of relieving v-grooves machined into the reverse in order to help keep the panel as flat as possible.

Alternatively, a laminate can be bonded to the reverse or an additional panel such as 18mm MDF can be used in place of the laminate. This increases the overall thickness, but offers additional bulk to help with hidden fixings

This machined design does not repeat

Information

Technical details (general)

  • Construction:
    • Single or multiple layers of through-coloured MDF or other suitable raw material with one surface machined to a deep, repeating pattern
  • Pattern height:
    • Approx. 5mm
  • Standard thickness:
    • Minimum 22mm
  • Standard sizes:
    • Produced to order in bespoke sizes
  • Pattern repeat:
    • Does not repeat
  • Maximum size:
    • Determined by material used and quantity required
    • In principle, panels can be supplied up to 3600x1500mm (max. size subject to availability of required material)
  • Finishing:
    • All items can be supplied raw or coated with various coatings such as clear lacquer or oil