Veneered Doors
- 350+ architectural veneers & inlays in exact quantity
- Supplied as sequenced or pairs of doors
- FD30 & FD60 max size 3050x1010mm or 2440x1220mm
- Can be supplied as part of a bespoke sequence or layout mixed with other panels
- Supplied raw or coated with various coatings such as clear lacquer or oil
- Click to see all standard veneered doors in full size
Overview
Premier Grade architectural veneered doors can be to specific design using any one of our range of 350+ veneers & inlays - or any other veneer specified, e.g. dyed veneers. Both fire doors and decorative cupboard doors can be supplied as a matched sequence or bookmatched sets, and can also be incorporated into a full layout with other panels, e.g. to achieve a 'hidden' door within a veneered wall.
Typical installations are high-quality bespoke kitchens, bedrooms, bathrooms, shopfitting & joinery.
In detail
Winwood Products is a supplier of the following veneered doors:
Architectural Veneered Fire Doors
- Quantity:
- Supplied in standard size or as fully matched sets of architectural veneered doors to specific design, order quantity & layout
- Standard size:
- Made to order
- Max size:
- Any bespoke size up to max. 3050x1010 / 2440x1220mm (or other suitable solid core material available)
- Thickness:
- 45mm FD30 & 54mm FD60 - Interior particleboard core
- 45mm FD30 & 54mm FD60 - Exterior blockboard core
- Special thickness doors can be supplied as a composite or using other material, e.g. MDF, birch plywood, but not with a fire rating
- Gluing:
- Moisture-resistant glue used as standard.
- Other glues can be used to special order, e.g. exterior glue, formaldehyde-free, etc.
- Edging:
- Concealed solid lumber lipping or veneer edging applied before calibration of faces & over-veneering
- Finishing:
- All items can be supplied raw or coated with various coatings such as clear lacquer or oil
Architectural Veneered Cupboard & Wardrobe Doors
- Quantity:
- Supplied as fully matched sets of architectural veneered panels to specific design, order quantity & layout
- Standard size:
- Produced to specific bespoke size
- Max size:
- Any bespoke size up to max 5000x1300mm / 3050x2440mm
- (NB: We would not recommend doors be produced wider than 1200mm)
- Core materials:
- Various types of MDF, e.g. through-coloured MDF, Standard, moisture-resistant, fire-rated
- Any plywood, e.g. birch plywood, lightweight poplar, beech plywood
- Thickness:
- Dependent upon the core specified
- Non-standard thickness can be achieve by bonding more than one material and/or calibrating to thickness
- Gluing:
- Moisture-resistant glue used as standard
- Other glues also available, e.g. exterior or formldehyde-free
- Edging:
- Concealed solid lumber lipping or veneer edging applied before calibration of faces & over-veneering
- Finishing:
- All items can be supplied raw or coated with various coatings such as clear lacquer or oil
Information
Tolerances (general)
- Thickness:
- Varies according to the core material used - plus nominal veneer thickness
- NB: Premier Grade doors are calibrated before veneering to ensure best adhesion
- Veneer thickness:
- Most veneers are approx. 0.6mm before sanding - adds approx 0.5mm per side if presanded
- Thicker veneers will typically finish approx. 0.3mm thinner than the original veneer thickness, e.g. 2.5mm veneers will add approx. 2.2mm per side if presanded
- Panel size:
- Standard size panels:Length/width: up to 1m @ ±1mm, up to 2m @ ±2mm , 2m & above @ ±3mm
- Cut size/bespoke panels:Length/width: typically ±1mm unless CNC machined (typically ±0.2mm)
- Non-standard tolerances by arrangement